SAFETY DATA SHEETS
According to the UN GHS revision 10
SECTION 1: Identification
1.1 GHS Product identifier
| Product name |
2-(2-butoxyethoxy)ethanol |
|---|
1.2 Other means of identification
| Product number |
- |
|---|---|
| Other names |
2-(2-butoxyethoxy)ethanol; Ethanol, 2-(2-butoxyethoxy)-; 2-(2-Butoxyethoxy)ethanol |
1.3 Recommended use of the chemical and restrictions on use
| Identified uses |
Industrial and scientific research use. |
|---|---|
| Uses advised against |
no data available |
1.4 Supplier's details
| Company |
chemicalbook |
|---|---|
| Address |
507, building 1, Huihuang international, Shangdi 10th Street, Haidian District, Beijing |
| Telephone |
+86-10-69703845 |
1.5 Emergency phone number
| Emergency phone number |
+86-13121892008 |
|---|---|
| Service hours |
Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours). |
SECTION 2: Hazard identification
2.1 Classification of the substance or mixture
Eye irritation, Category 2
2.2 GHS label elements, including precautionary statements
| Pictogram(s) |
|
|---|---|
| Signal word |
Warning |
| Hazard statement(s) |
H319 Causes serious eye irritation |
| Precautionary statement(s) | |
| Prevention |
P264 Wash ... thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/... |
| Response |
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| Storage |
none |
| Disposal |
none |
2.3 Other hazards which do not result in classification
no data available
SECTION 3: Composition/information on ingredients
3.1 Substances
| Chemical name | Common names and synonyms | CAS number | EC number | Concentration |
|---|---|---|---|---|
| 2-(2-butoxyethoxy)ethanol | 2-(2-butoxyethoxy)ethanol | 112-34-5 | 203-961-6 | 100% |
SECTION 4: First-aid measures
4.1 Description of necessary first-aid measures
If inhaled
Fresh air, rest.
Following skin contact
Remove contaminated clothes. Rinse skin with plenty of water or shower.
Following eye contact
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Following ingestion
Rinse mouth.
4.2 Most important symptoms/effects, acute and delayed
Inhalation for brief periods has no significant effect. Contact with liquid causes moderate irritation of eyes and corneal injury. Prolonged contact with skin causes only minor irritation. (USCG, 1999)
4.3 Indication of immediate medical attention and special treatment needed, if necessary
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Ethers and related compounds
SECTION 5: Fire-fighting measures
5.1 Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Specific hazards arising from the chemical
This chemical is combustible. (NTP, 1992)
5.3 Special protective actions for fire-fighters
Use water spray, powder, alcohol-resistant foam, carbon dioxide.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Collect leaking liquid in sealable containers. Wash away remainder with plenty of water.
6.2 Environmental precautions
Collect leaking liquid in sealable containers. Wash away remainder with plenty of water.
6.3 Methods and materials for containment and cleaning up
Use personal protective equipment. Avoid breathign vapors, mist, or gas. Ensure adequate ventilation.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
NO open flames. Above 78°C use a closed system and ventilation. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
7.2 Conditions for safe storage, including any incompatibilities
Separated from strong oxidants. Ventilation along the floor.Conditions for safe storage, including any incompatibilities: Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational Exposure limit values
TLV: 10 ppm as TWA.MAK: 67 mg/m3, 10 ppm; peak limitation category: I(1); pregnancy risk group: C.EU-OEL: 67.5 mg/m3, 10 ppm as TWA; 101.2 mg/m3, 15 ppm as STEL
Biological limit values
no data available
8.2 Appropriate engineering controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
8.3 Individual protection measures, such as personal protective equipment (PPE)
Eye/face protection
Wear safety spectacles.
Skin protection
Protective gloves.
Respiratory protection
Use ventilation. Use local exhaust.
Thermal hazards
no data available
SECTION 9: Physical and chemical properties and safety characteristics
| Physical state |
Liquid. |
|---|---|
| Colour |
Colourless. |
| Odour |
Faint butyl odor |
| Melting point/freezing point |
< -70 °C. Atm. press.:1 atm. |
| Boiling point or initial boiling point and boiling range |
231 °C. Atm. press.:1 atm. |
| Flammability |
Combustible. |
| Lower and upper explosion limit/flammability limit |
Lower flammable limit: 0.85% by volume; Upper flammable limit: 24.6% by volume |
| Flash point |
93 °C. Atm. press.:1 atm. |
| Auto-ignition temperature |
210 °C. Atm. press.:1 013.25 hPa. |
| Decomposition temperature |
no data available |
| pH |
Neutral |
| Kinematic viscosity |
dynamic viscosity (in mPa s) = 6.49. Temperature:20°C. |
| Solubility |
greater than or equal to 100 mg/mL at 68° F (NTP, 1992) |
| Partition coefficient n-octanol/water |
log Pow = 1. Temperature:20 °C. |
| Vapour pressure |
0.022 mm Hg. Temperature:25 °C. |
| Density and/or relative density |
Ca. 955.3 kg/m3. Temperature:20 °C. |
| Relative vapour density |
5.6 (vs air) |
| Particle characteristics |
no data available |
SECTION 10: Stability and reactivity
10.1 Reactivity
The substance can presumably form explosive peroxides. Reacts with strong oxidants.
10.2 Chemical stability
no data available
10.3 Possibility of hazardous reactions
Combustible when exposed to heat or flame; can react with oxidizing materials.DIETHYLENE GLYCOL MONOBUTYL ETHER is a ether-alcohol derivative. The ether being relatively unreactive. Flammable and/or toxic gases are generated by the combination of alcohols with alkali metals, nitrides, and strong reducing agents. They react with oxoacids and carboxylic acids to form esters plus water. Oxidizing agents convert alcohols to aldehydes or ketones. Alcohols exhibit both weak acid and weak base behavior. They may initiate the polymerization of isocyanates and epoxides.
10.4 Conditions to avoid
no data available
10.5 Incompatible materials
Glycol ethers, glycols, ketones, and alcohols undergo violent decomposition in contact with 68-72% perchloric acid
10.6 Hazardous decomposition products
When heated to decomposition it emits acrid smoke and irritating fumes.
SECTION 11: Toxicological information
Acute toxicity
- Oral: LD50 - mouse (male) - 2 410 mg/kg bw. Remarks:Results for fasted animals.
- Inhalation: inhalation risk test - rat - > 29 ppm.
- Dermal: LD50 - rabbit (male) - 2 764 mg/kg bw.
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
The substance is irritating to the eyes.
STOT-repeated exposure
The substance defats the skin, which may cause dryness or cracking.
Aspiration hazard
A harmful contamination of the air will be reached slowly on evaporation of this substance at 20°C; on spraying or dispersing, however, much faster.
SECTION 12: Ecological information
12.1 Toxicity
- Toxicity to fish: LC50 - Lepomis macrochirus - 1 300 mg/L - 96 h.
- Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna - > 100 mg/L - 48 h.
- Toxicity to algae: NOEC - Desmodesmus subspicatus (previous name: Scenedesmus subspicatus) - >= 100 mg/L - 96 h.
- Toxicity to microorganisms: EC10 - activated sludge, industrial - > 1 995 mg/L - 30 min. Remarks:Respiration rate.
12.2 Persistence and degradability
AEROBIC: Diethylene glycol mono-n-butyl ether had a 5 day BOD and COD of 0.25 and 2.08 g/g, respectively, this calculates to respective theoretical BOD and COD of 11 and 95%(1). Diethylene glycol mono-n-butyl ether showed losses of 2, 13, and 47% of the theoretical BOD when incubated at 20 deg C for 5, 10, and 20 days, respectively(2). Diethylene glycol mono-n-butyl ether degraded 14, 19, 60, and 100% when incubated for 1, 3, 5, and 6 days, respectively, using a non-adapted activated sludge and a modified Zahn-Wellens test(3). Another modified Zahn-Wellens test using non-adapted activated sludge gave 100% degradation after 9 days(3). Diethylene glycol mono-n-butyl ether showed 58 and >60% removal after 28 days using adapted activated sludge(3). In another screening study, diethylene glycol mono-n-butyl ether showed losses of 27, 60, 78, and 81% when incubated at 20 deg C for 5, 10, 15, and 20 days, respectively(4). Using the OECD 301D screening test, diethylene glycol mono-n-butyl ether showed losses of 3, 70, and 88% when incubated at 20 deg C for 5, 15, and 28 days, respectively(4). Using the OECD 301A method diethylene glycol mono-n-butyl ether showed a 94% removal after 14 days(3). Diethylene glycol mono-n-butyl ether had 5, 10, and 15 day BODs of 5.2, 57, and 72% of theoretical BOD(3). Diethylene glycol mono-n-butyl ether, present at 100 mg/L, reached 92% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(5). A study using activated sludge gave a degradation rate for diethylene glycol mono-n-butyl ether of 0.37/hour(6) giving a half-life of about 1.9 hours(SRC).
12.3 Bioaccumulative potential
An estimated BCF of 3 was calculated in fish for diethylene glycol mono-n-butyl ether(SRC), using a log Kow of 0.56(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
12.4 Mobility in soil
Using a structure estimation method based on molecular connectivity indices(1), the Koc of diethylene glycol mono-n-butyl ether can be estimated to be 10(SRC). According to a classification scheme(2), this estimated Koc value suggests that diethylene glycol mono-n-butyl ether is expected to have very high mobility in soil.
12.5 Other adverse effects
no data available
SECTION 13: Disposal considerations
13.1 Disposal methods
Product
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
SECTION 14: Transport information
14.1 UN Number
| ADR/RID: Not dangerous goods. (For reference only, please check.) | IMDG: Not dangerous goods. (For reference only, please check.) | IATA: Not dangerous goods. (For reference only, please check.) |
14.2 UN Proper Shipping Name
| ADR/RID: Not dangerous goods. (For reference only, please check.) | IMDG: Not dangerous goods. (For reference only, please check.) | IATA: Not dangerous goods. (For reference only, please check.) |
14.3 Transport hazard class(es)
| ADR/RID: Not dangerous goods. (For reference only, please check.) | IMDG: Not dangerous goods. (For reference only, please check.) | IATA: Not dangerous goods. (For reference only, please check.) |
14.4 Packing group, if applicable
| ADR/RID: Not dangerous goods. (For reference only, please check.) | IMDG: Not dangerous goods. (For reference only, please check.) | IATA: Not dangerous goods. (For reference only, please check.) |
14.5 Environmental hazards
| ADR/RID: No | IMDG: No | IATA: No |
14.6 Special precautions for user
no data available
14.7 Transport in bulk according to IMO instruments
no data available
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations specific for the product in question
| Chemical name | Common names and synonyms | CAS number | EC number |
|---|---|---|---|
| 2-(2-butoxyethoxy)ethanol | 2-(2-butoxyethoxy)ethanol | 112-34-5 | 203-961-6 |
| European Inventory of Existing Commercial Chemical Substances (EINECS) | Listed. | ||
| EC Inventory | Listed. | ||
| United States Toxic Substances Control Act (TSCA) Inventory | Listed. | ||
| China Catalog of Hazardous chemicals 2015 | Not Listed. | ||
| New Zealand Inventory of Chemicals (NZIoC) | Listed. | ||
| Philippines Inventory of Chemicals and Chemical Substances (PICCS) | Listed. | ||
| Vietnam National Chemical Inventory | Listed. | ||
| Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) | Listed. | ||
| Korea Existing Chemicals List (KECL) | Listed. | ||
SECTION 16: Other information
Information on revision
| Creation Date | July 15, 2019 |
|---|---|
| Revision Date | July 15, 2019 |
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
Other Information
Check for peroxides prior to distillation; eliminate if found.
Any questions regarding this SDS, Please send your inquiry to sds@xixisys.com
Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.